Battery Plug Grip Set 4mm / Black & Red

"Battery Plug Grip set" has an overwhelming cooling effect compared to conventional similar products, so it efficiently dissipates heat from the battery body from the grip part and reduces power loss during high-load driving.

A set of aluminum grip [Radiation Grip] and large-capacity power male connector (Φ4mm).
Precise design according to the connector size and crimping fixation with set screws increase the adhesion between the grip and connector, and maximize the contact area with the aluminum volume and connector for efficient heat dissipation.
In addition, Not only Black and red, also another color variations, driver can create favorite style of power source much custom theme of RC car.

If the connector part deteriorates or wears out due to use, please use the separately sold Connector Kit (Φ4mm/Φ5mm/both with set screws).

You can also use the conventional power transmission connector (60629/60631). In this case, please use the set screw included in the [Battery Plug Grip set].


[Important]
*The aluminum cut-out parts of the radiation grip and the set screw are non-insulated (conductive). To prevent electric shock, never touch both the positive and negative grips at the same time while the battery is plugged in. Also, be careful not to short circuit due to metal fragments etc.

*Please be careful when handling the battery and radiation grip as they may be hot immediately after driving.

[Battery Plug Grip set / Contents]
Radiation grip (1 each positive and negative)
Φ4mm male connector x 2
Set screw x 2
Shrink tube (red) for identifying the positive side